MTRJ 単一モード 双芯 光ファイバコネクタ

  • 重量: 100kg

450円

カートに入れる:
最小:  10

MTRJ 単一モード 双芯 光ファイバコネクタ

MT-RJ and MPO fiber optic connectors belong to MT series, which makes use of the guide hole and guide pin with 0.7mm diameter to achieve connection with perfect alignment. The pin and hole are installed on the end face of the fiber optic connector.
MT-RJ fiber optic connector usually comes with two ferrules, while MPO fiber connector can be designed with 2 to 12 ferrules, 24 ferrules at most. Environment reliability of MPO type conforms to Telcordia GR-1435-CORE, IEC/EN 61754-7 and TIA-568-B.1-7 standards. Thanks to its compacting structure, the fiber optic connector has many ferrules and features a small volume. Hence, this optical connector can be used for wiring process in need of high intensity integrated optical lines.

[特長]
1. 高品質挿芯,PIN 針精確に向ける|High quality ferrule and perfect alignment of PIN
2. 低挿入損失|Low insertion loss
3. RJ-45の構造設計|RJ-45 structural design

[応用]
1. ビルが密集する配線|Building wiring with high intensity
2. CATV
3. 能動部品|Active devices
4. 光ファイバ通信係統|Optical fiber communication system
5. 通信ネットワーク|Telecommunication network 
6. LANs, WANs
7. FTTB, FTTX
8. 40/100G光トランシーバ|40/100G optical transceivers

選べるタイプ
MT-RJ Connector
1. Fiber tail sleeve with two 2mm ferrules or with one 3mm ferrule can be provided.
2. Connector head with or without PIN is optional.
MPO Connector
1. Ribbon type tail sleeve and 3.0mm bunchy type are selectable.
2. Connector head with or without PIN can be supplied.
3. MTP connector head is available.

規格

項目 パラメータ
光ファイバ類型 単一モード
試験波長 850nm,1300nm
典型的な挿入損失 ≤0.25dB
最大の挿入損失 ≤0.30dB
エコー損 PC≥40dB
挿抜性能 Mating 500, typical≤0.30dB
作業温度 2 0℃~ + 70℃
貯蔵温度 -40 ℃~ + 85℃
挿パラメータ 口径:127±1μm, concentricity≤1.4μm 
挿芯数 MT-RJ:2 ; MPO:4, 6, 8, 12,24
MTRJ 単一モード 双芯 光ファイバコネクタ
 






wabusiness template
LiveZilla Live Chat Software
LiveZilla Website Chat Software