1064nm 赤外線 受動Qスイッチ パルスレーザー 固体レーザー 調整可能な電源
[特徴]
1. 受動Qスイッチ
2. 調整可能な繰り返し周波数
[仕様]
| モデル |
Model#01-1064HQ |
Model#02-1064HXQ |
Model#03-1064HYQ |
| 波長 |
1064nm |
1064nm |
1064nm |
| 空間モード |
TEM00 |
TEM00 |
TEM00 |
| 平均出力パワー |
near 200mW |
near 500mW |
near 1000mW |
| 単一パルスエネルギー |
default near 20uJ (10~50uJ customizable） |
default near 50uJ (1~200uJ customizable) |
default near 80uJ (1~100uJ customizable) |
| パルス幅 |
default near 15ns (5~50ns customizable） |
default near 20ns (5~50ns customizable) |
default near 20ns (10~30ns customizable) |
| ピークパワー |
500W~10KW |
1KW~10KW |
500W~5KW |
| 繰り返し率 |
default near 10KHz (1Hz~50KHz customizable ) |
default near 10KHz (10Hz~50KHz customizable) |
default near 12KHz (10Hz~30KHz customizable) |
| 変調信号 |
0~50KHz |
0~50KHz |
0Hz~30KHz |
| ビームスポット形状 |
円形, 縦横比<1.1:1 |
円形, 縦横比<1.1:1 |
円形, 縦横比<1.1:1 |
| ポインティング安定性 |
<0.05 mrad |
<0.05 mrad |
<0.05 mrad |
| ビーム径（1/e2） |
<1.5 mm |
<1.5 mm |
<1.5 mm |
| ビーム発散 |
<1.5 mrad |
<1.5 mrad |
<1.5 mrad |
| パワー安定性 |
<±3% per 2 hrs |
<±3% per 2 hrs |
<±3% per 2 hrs |
| ビームの高さ |
29mm |
39mm |
29mm |
| 温度安定化 |
TEC |
TEC |
TEC |
| ウォームアップ時間 |
<5 分 |
<5 分 |
<5 分 |
| ビーム品質（M2） |
<2 |
<2 |
<2 |
| 最適動作温度 |
20~30℃ |
20~30℃ |
20~30℃ |
| 保管温度 |
10~50℃ |
10~50℃ |
10~50℃ |
| MTTF |
10,000 hrs |
10,000 hrs |
10,000 hrs |
| レーザーヘッドサイズ |
155(L)x77(W)x60(H)mm3 |
167(L)x77(W)x70(H)mm3 |
155(L)x77(W)x60(H)mm3 |
| 電源サイズ |
178(W)x197(D)x84(H) mm3 |
178(W)x197(D)x84(H) mm3 |
178(W)x197(D)x84(H) mm3 |
| 備考 |
The average power of this model Q-switched laser is about 200mw. The two parameters of single pulse energy and repetition frequency affect each other. |
The average power of this model Q-switched laser is about 500mw. The two parameters of single pulse energy and repetition frequency affect each other. |
The average power of this model Q-switched laser is about 1000mw. The two parameters of single pulse energy and repetition frequency affect each other. |
[主なパラメータの説明]
(1) Repeat rate
The max repeat rate is fixed.
1 ~ max repeat rate can be adjusted by Exteranl input signal.
(2) Single pluse energy
It can be customized according to your needs.
It is a fixed value after production is completed.
(3) Pulse width
It can be customized according to your needs.
It is a fixed value after production is completed.
(4)Average output power
Average output power = [Repeat rate]*[Single pulse energy]
e.g.
Repeat Rate: 1~10KHz
Single Pulse Energy: near 20uJ
Average output power = [Repeat rate]*[Single pulse energy] = 10*1000*20 = 200000uJ (200mW)
(5)Peak Power
Peak Power = [Single pulse energy]/[Pulse Width]
e.g.
Pulse Width: near 15ns
Single Pulse Energy: near 20uJ
Peak Power = [Single pulse energy]/[Pulse Width] = 20uJ/15ns = 20*10^(-6) / 15 * 10^(-9) = 20 / (15*0.001) = 1333W
Follow us on Twitter
Facebook page
CivilLaser YouTube