26dBm 400mW Cバンド EDFA Erドープ光ファイバ増幅器 EDFA-C-BA-26-SM-B デスクトップ型

ベース価格: 335,343円

選択して下さい:



カートに入れる:


26dBm 400mW  Cバンド EDFA  Erドープ光ファイバ増幅器 EDFA-C-BA-26-SM-B   デスクトップ型

エルビウムドープファイバ増幅器(EDFA)は高性能、小型のファイバ増幅器製品である。
安定した高出力半導体レーザ、WDMの高安定性、アイソレータ、高利得エルビウム添加ファイバの内部使用。
この製品は、高信頼性、高出力、高利得、低ノイズという利点を持っています。
これは高出力EDFAシステムの理想的な選択。この製品は5 V DC電源を採用しています、小型でシステムへの統合が容易、顧客のニーズを満たすために。

Erbium doped fiber amplifier (EDFA) is a high performance, small size of the fiber amplifier products.
The internal use of stability high power semiconductor laser, the high stability of WDM, isolator,and high gain erbium-doped fiber.
The product has the advantages of high reliability, high power output, high gain and low noise.
This is the ideal choice of high power EDFA system, this product uses 5V DC power supply, compact size, easy to integrate in the system to meet the needs of customers.

EDFAは2種類あります(現在の製品はブースターアンプタイプです)。
プリアンプ増幅器:PAと呼ばれ、小光信号増幅の-40〜-25 dBmの範囲で使用されます、35デシベルの典型的な利得。
ブースタ増幅器: BAと呼ばれる,光信号は- 6 ~ +10 dBmの範囲内での電力を向上させるため、最大出力電力は27 dBmである。

There are two types EDFA.(Current product is Booster-Amplifier type.)
Pre - Amplifier, referred to as PA, that is preamplifier, used in the -40 ~ -25 dBm range of small light signal amplification, typical gain of 35 dB;
Booster - Amplifier, referred to as BA, is used to enhance the power of the optical signal in the range of - 6 ~ +10 dBm, with a maximum output power of 27 dBm;

[特性]
高信頼性
広い動作波長範囲
高利得、利得平坦性は良いです
高出力
良好な温度適応性

[応用]
光ファイバ通信
光ファイバセンサ
光ファイバレーザ


[仕様]

Parameters
パラメーター

Unit
単位

Typical value
典型値

Remarks
備考

Model
モデル

 

EDFA-C-BA-26-SM-B

 

Wavelength Range
波長範囲

nm

1530~1565

C-band

Input power
入力パワー

dBm

-6~+10

 

Saturated output power
飽和出力パワー

dBm

≥26

@-3dBm Input

Noise index
雑音指数

dB

≤5.0

@-3dBm Input

Polarization dependent gain
偏光依存利得

dB

<0.3

 

Polarization mode dispersion
偏光モード分散

ps

0.5

 

Input/output isolation
入力/出力側分離度

dB

>35

 

Pigtail fiber type
ピグテールファイバータイプ

--

SMF-28 Single Mode fiber

L=1m

Pigtail connector type
ピグテールコネクタタイプ

--

FC/APC

 

Work mode
作業モード

--

ACC / APC

*Note1

 

*注1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
ACCモード - 自動電流制御:EDFAポンピング動作電流はユーザーによって設定され、EDFAによって自動的にロックされ、一定のポンピング電流を実現します。 入力光パワーが変動すると、それに応じて出力パワーも変動します。これは、すべてのEDFAモデルに適しています。

APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.
APCモード - 自動電力制御:EDFAの信号光出力電力はユーザーが設定し、PDは出力電力を自動的に監視およびフィードバックします。EDFA制御および適応調整ポンプは出力信号の安定性を実現します。 入力光パワーが変動する場合、APCモードは出力パワーの変動を最小化し、パワータイプおよびラインタイプEDFAに適しています。

 

Electrical and environmental parameters
電気および環境パラメータ

Desktop Type
デスクトップ型(現行品)

Module Type
モジュールタイプ

Control method
制御モード

Button

RS232 Serial communication

Communication interface
通信インターフェース

DB9 Female
(Default not include)

DB9 Female

Power supply
電源

AC 100~240V

DC 5V, 3A 

Size
サイズ

260(W)×280(D)×120(H)mm

125(W)×150(D)×20(H)mm

Operating temperature range
動作温度範囲

-5~+35°C

Operating humidity range
動作湿度範囲

0~70%

 

 

エルビウム添加ファイバ増幅器 EDFA

エルビウム添加ファイバ増幅器 EDFA

エルビウム添加ファイバ増幅器 EDFA

エルビウム添加ファイバ増幅器 EDFA
 

テストデータリファレンス:
Erbium-doped Fiber Booster Amplifier for C-band

Erbium-doped Fiber Booster Amplifier for C-band
 







wabusiness template