1060nm/1310nm/1480nm1550nm 偏光維持光ファイバミラー PMリフレクター FC/APC
偏光維持ファイバーミラー13101550nmは、さまざまな全ファイバーデバイスで非常に実用的であり、多くの場合、ファイバーの端に取り付けられます。 ファイバー干渉計、調整可能な再帰反射器、ファイバーアンプなどの場合、98%以上になり、損失が非常に少なくなります。光は元のファイバーに反射して戻ります。 フリースペースカップリングの光損失を低減し、安定したリファレンスアームを実現します。
Polarization-maintaining fiber mirror 1310 1550nm is very practical in various all-fiber devices, and is often installed at the end of the fiber; such as fiber interferometer, adjustable retroreflector and fiber amplifier, etc., it will be more than 98% with extremely low loss The light reflected back into the original fiber. Reduce the light loss of free space coupling, thereby realizing a stable reference arm.
[特徴]
低挿入損失
高い消光比
[応用]
光ファイバ反射率計
OCTシステム
実験室実験
[仕様]
パラメーター |
単位 |
値 |
中心波長 |
nm |
1060 / 1310 / 1480 / 1550 (選ぶ) |
帯域幅 |
nm |
±30 |
典型的な挿入損失 |
dB |
0.30 |
最大挿入損失 |
dB |
0.50 |
典型的な消光比 |
dB |
25 |
最小消光比 |
dB |
22 |
最小リターンロス |
dB |
60 |
最大光学パワー (CW) |
mW |
500 |
最大引張荷重 |
N |
5 |
ピグテールタイプ |
|
PM Panda fiber |
動作温度 |
℃ |
-5 ~ +70 |
保管温度 |
℃ |
-45 ~ +85 |
1550nm PMファイバーミラーのテストデータシート:
パラメーター |
単位 |
仕様 |
テストデータ |
中心波長 |
nm |
1550 |
1550 |
帯域幅 |
nm |
±30 |
±30 |
最大挿入損失 |
dB |
0.80 |
0.68 |
最小消光比 |
dB |
18 |
21 |
コネクタタイプ |
|
FC/APC |
ファイバータイプ |
|
PM1550 |
ピグテールタイプ |
|
900μm loose tube (red) |
ファイバーの長さ |
m |
1.0 |
最大光学パワー (CW) |
mW |
500 |
最大引張荷重 |
N |
5 |
動作温度 |
℃ |
-5 ~ +50 |
保管温度 |
℃ |
-45 ~ +80 |
寸法 |
mm |
Φ4.5 x 25 |