1X2 偏光維持ファイバーカプラー PM1550 One-to-Two ファイバーカプラー LC/APC 遅い軸
フィルタタイプの偏光維持カプラは、干渉タイプのフィルタを使用して、入力PMファイバからの光ビームを2つの出力PMファイバに分割するだけでなく、2つのPMファイバの光を1つのPMファイバに結合します。 このデバイスは、直線偏光を変更することなく、高出力の直線偏光を複数のチャネルに分離するために使用できます。 また、光信号の偏光状態を変えることなく、PMファイバシステムの信号を監視するためのパワースプリッタとして使用することもできます。 パワー。
The filter-type polarization-maintaining coupler uses interference-type filters to not only split the light beam from the input PM fiber into two output PM fibers, but also combine the light of two PM fibers into one PM fiber. This device can be used to separate high-power linearly polarized light into multiple channels without changing the linear polarization. It can also be used as a power splitter to monitor the signal of the PM fiber system without changing the polarization state of the optical signal. power.
[特徴]
低挿入損失
高い消光比
高い分離
高い安定性と信頼性
[応用]
ファイバーアンプ
ファイバーレーザー
ファイバーセンサー
[仕様]
パラメータ |
単位 |
標準値 |
テストデータ |
波長 |
nm |
1550 |
1550 |
動作帯域幅 |
nm |
±40 |
±40 |
タップ率 |
% |
50 |
50 |
最大挿入損失 (Port3-Port1/2) |
dB |
4.0 |
3.60/3.53 |
最大均一性 |
dB |
0.4 |
0.07 |
最小消光比 (Port3-Port1/2) |
dB |
20 |
20/20 |
最小リターンロス |
dB |
45 |
50 |
最小指向性 |
dB |
50 |
55 |
軸の位置合わせ |
|
高速軸がブロックされました |
コネクタタイプ |
|
LC/APC |
ピグテールタイプ |
|
900μmルーズチューブ(赤) |
ファイバータイプ |
|
PM1550 |
ファイバーの長さ |
m |
1.0 |
最大光学パワー (CW) |
mW |
500 |
最大引張荷重 |
N |
5 |
動作温度 |
°C |
-5~+70 |
保管温度 |
°C |
-40 ~ +80 |
寸法 |
mm |
φ5.5 × L35 |