1359nm 1x2 PM ファイバーカプラー FC/APC 偏波保持カプラー

38,928円

カートに入れる:


1359nm 1x2 PM ファイバーカプラー FC/APC 偏波保持カプラー

フィルタタイプの偏光維持カプラは、干渉タイプのフィルタを使用して、入力PMファイバからの光ビームを2つの出力PMファイバに分割するだけでなく、2つのPMファイバの光を1つのPMファイバに結合します。 このデバイスは、直線偏光を変更することなく、高出力の直線偏光を複数のチャネルに分離するために使用できます。 また、光信号の偏光状態を変更せずに、PMファイバシステムの信号パワーを監視するためのパワースプリッタとして使用することもできます。
The filter-type polarization-maintaining coupler uses interference-type filters to not only split the light beam from the input PM fiber into two output PM fibers, but also combine the light of two PM fibers into one PM fiber. This device can be used to separate high-power linearly polarized light into multiple channels without changing the linear polarization. It can also be used as a power splitter to monitor the signal power of the PM fiber system without changing the polarization state of the optical signal.

[特徴]
低挿入損失
ハイリターンロス

[応用]
ファイバーアンプ
ファイバーレーザー
ファイバーセンサー

[仕様]

パラメータ 単位 テストデータ
ファイバーポート   1x2
中心波長 nm 1359 1359
動作帯域幅 nm ±40 ±40
最大挿入損失(Port1 to Port3 ) dB 0.90 0.62
最大挿入損失 (Port2 to Port3 ) dB 0.90 0.46
最小消光比(Port1/2 to Port3 ) dB 20 21/20
最小リターンロス dB 50 55
軸の位置合わせ   Slow axis align to potr1
ファイバータイプ   PM1310
ピグテールタイプ   900μm loose tube (red)
コネクタタイプ   FC/APC
ファイバーの長さ m 1.0
最大光パワー (CW) mW 300
最大引張荷重 N 5
動作温度 °C -5~+70
保管温度 °C -40 ~ +85
寸法 mm φ5.5 × L35
 
 
PMファイバーカプラー

PMファイバーカプラー

PMファイバーカプラー

PMファイバーカプラー

PMファイバーカプラー

PMファイバーカプラー
 






wabusiness template