1064nm 1310nm 1480nm 1550nm PM ファイバーカプラー 1X2 PMカプラー 遅い軸をKキーに合わせます
フィルタタイプの偏光維持カプラは、干渉タイプのフィルタを使用して、入力PMファイバからの光ビームを2つの出力PMファイバに分割するだけでなく、2つのPMファイバの光を1つのPMファイバに結合します。 このデバイスは、直線偏光を変更することなく、高出力の直線偏光を複数のチャネルに分離するために使用できます。 また、光信号の偏光状態を変更せずに、PMファイバシステムの信号パワーを監視するためのパワースプリッタとして使用することもできます。
The filter-type polarization-maintaining coupler uses interference-type filters to not only split the light beam from the input PM fiber into two output PM fibers, but also combine the light of two PM fibers into one PM fiber. This device can be used to separate high-power linearly polarized light into multiple channels without changing the linear polarization. It can also be used as a power splitter to monitor the signal power of the PM fiber system without changing the polarization state of the optical signal.
[特徴]
低挿入損失
ハイリターンロス
[応用]
ファイバーアンプ
ファイバーレーザー
ファイバーセンサー
[仕様]
パラメータ |
単位 |
値 |
ファイバーポート |
|
1x2 |
中心波長 |
nm |
1310nm / 1480nm / 1550nm |
1064nm |
動作帯域幅 |
nm |
±40 |
±20 |
過剰な損失 |
dB |
≤0.7 |
≤0.8 |
均一性(50/50) |
dB |
≤0.4 |
≤0.5 |
分割比 |
% |
1±0.2%,2±0.4%,5±1%,10%,20%,30%,50% |
最小 リターンロス |
dB |
50 |
消光比(タイプF) |
dB |
≥22 |
≥22 |
消光比(タイプB) |
dB |
≥20 |
≥20 |
ロード可能な光パワー |
mW |
≤300 |
ファイバータイプ |
|
入力ポートと出力ポートの極性維持ファイバー |
動作温度 |
°C |
-5~+70 |
保管温度 |
°C |
-40 ~ +85 |
寸法 |
mm |
φ5.5 × L35 |