1310nm 1550nm 偏光維持ファイバーカプラー PM1550 FC/APC-FC/UPC
フィルタタイプの偏光維持カプラは、干渉タイプのフィルタを使用して、入力PMファイバからの光ビームを2つの出力PMファイバに分割するだけでなく、2つのPMファイバの光を1つのPMファイバに結合します。 このデバイスは、直線偏光を変更することなく、高出力の直線偏光を複数のチャネルに分離するために使用できます。 また、光信号の偏光状態を変えることなく、PMファイバシステムの信号を監視するためのパワースプリッタとして使用することもできます。 パワー。
The filter-type polarization-maintaining coupler uses interference-type filters to not only split the light beam from the input PM fiber into two output PM fibers, but also combine the light of two PM fibers into one PM fiber. This device can be used to separate high-power linearly polarized light into multiple channels without changing the linear polarization. It can also be used as a power splitter to monitor the signal of the PM fiber system without changing the polarization state of the optical signal. power.
[特徴]
低挿入損失
高い消光比
高い分離
高い安定性と信頼性
[応用]
ファイバーアンプ
ファイバーレーザー
ファイバーセンサー
[仕様]
パラメータ |
単位 |
値 |
ファイバーポート |
|
1x2 |
中心波長 |
nm |
1310 / 1550 (選択) |
動作帯域幅 |
nm |
±40 |
過剰な損失 |
dB |
0.7 |
最大均一性(50/50) |
dB |
0.5 |
分割比 |
% |
1±0.2%,2±0.4%,5±1%,10%,20%,30%,50% |
最小 リターンロス |
dB |
50 |
最小 消光比(タイプF) |
dB |
22 |
最小 消光比(タイプB) |
dB |
20 |
最大ロード可能光パワー |
mW |
500 |
抗張力 |
N |
5 |
ファイバータイプ |
|
入力ポートと出力ポートの極性維持ファイバー |
ファイバーインターフェース |
|
FC/APC-FC/APC(ディフォルト), FC/APC-FC/UPC, FC/UPC-FC/UPC |
動作温度 |
°C |
-5~+70 |
保管温度 |
°C |
-40 ~ +85 |
寸法 |
mm |
φ5.5 × L35 |