450nm 80mW 青色 ファイバー結合レーザー 高安定性 ダイオードレーザー
注:この製品にはデフォルトで光ファイバーがありません。光ファイバーが必要な場合はお問い合わせください。
[特徴]
光出力:70mW(CW)
バイオレットレイジング:440-406nm
低動作電流:100mA(標準)
低動作電圧:5.1V(標準)
[応用]
ファイバーメディカル
レーザー研究
PCBの直接イメージング
LDI
バイオアッセイ
材料加工
光学的および電気的特性(Tc = 25℃)
パラメータ |
シンボル |
最小値 |
標準値 |
最大値 |
単位 |
LDパルスパワー |
Pp |
/ |
/ |
/ |
mW |
LDパルス電流 |
Pp |
/ |
/ |
/ |
mA |
光出力パワー |
Po |
65 |
70 |
/ |
mW |
動作電流 |
Iop |
/ |
100 |
120 |
mA |
動作電圧 |
Vop |
/ |
5.1 |
6 |
V |
レーザー波長 |
λp |
440 |
450 |
460 |
nm |
電パワー |
W1 |
/ |
0.51 |
0.72 |
W |
パラメータ |
値 |
光出力効率 |
≥85% |
作業温度 |
0~50℃ |
保管温度 |
-40~+85℃ |
作業モード |
連続 |
主な構造材料 |
銅 |
カップリングレンズの材質 |
光学ガラス |
インターフェイスタイプ |
2.5mm光学コアナット固定 |
エンクロージャーの極性 |
極性なし |
溶接デバッグ構造 |
ステンレス鋼 |
耐用時間 |
10000H |
平均故障時間 |
26000H |
注意:
1. レーザーモジュールから放出されるレーザー光は人の目を傷つける可能性がありますので、その端面を直接見つめたり、作業中のレーザー光を防ぐために適切な保護メガネを着用しないでください。
The laser light emitted by the laser module is likely to injure persons'eye, so do not directly gaze its end surface and wear appropriate safety glasses to prevent laser light when it is working.
2. レーザーモジュールには、適切なレーザードライバー(PCB)が必要です。 レーザーモジュールを電源に接続する場合は、出力電圧をゼロに設定してください。 デバイスの損傷を防ぐために、電流の調整はゆっくりと増減する必要があります。
Laser module needs an appropriate laser driver(PCB). When the laser module connects with power supply, please set the output voltage to zero. The adjustment of the current should be slowly increased or decrease to avoid damaging the device.
3. デバイスを動作させたり、乾燥した環境で保管したりしてください。 レンズ内部のほこりがレーザードットの形状に影響を与えるのを防ぐために、防塵グレードは100万を超えています。
Keep the device working or storing in a dry environment. The anti-dust grade is over one million, in order to prevent dust inside the lens to affect the laser dot shape.
4. 高温で動作すると、しきい値電流が増加し、変換効率が低下し、デバイスの経年劣化が加速します。
Working at high temperatures will increase the threshold current, reduce conversion efficiency and speed up the aging of the device.
5. 出力電力が特定の動作パラメータよりも高い場合、デバイスの経年劣化が加速します。
When output power is higher than it's specific parameter of operation, it will accelerate the aging of the device.
6. レーザーダイオードの動作温度が50℃を超える場合は、十分に放熱してください。
When the operation temperature of the laser diode is over 50℃, please do well heat dissipation of it.
7. このレーザーモジュールは、静電に敏感なデバイスです。 使用する前に、必ず自分で接地するか、帯電防止リストストラップを着用してください。
This laser module is an electrostatic sensitive device. Please make sure ground yourself or wear an antistatic wrist strap before you take it.