Cバンド 40dBm 高出力 エルビウムドープファイバ増幅器 モジュールタイプ EYDFA-C-HP-BA-40-SM-M
高出力シングルモードエルビウムドープファイバ増幅器(EYDFA-HP)は、エルビウムドープファイバの光信号のレーザー増幅の原理に基づいており、独自の多段光増幅設計と信頼性の高い高出力レーザー熱放散技術を使用しています。 1540〜1565nmの波長範囲を実現するために内部高出力レーザー出力。 高出力、低ノイズというメリットがあり、光ファイバー通信やレーザーレーダーなどに使用できます。
High-power single-mode erbium-doped fiber amplifier (EYDFA-HP) is based on the principle of laser amplification of optical signals in erbium-doped fiber, using unique multi-stage optical amplification design and reliable high-power laser heat dissipation technology to achieve the wavelength range of 1540~1565nm Internal high-power laser output. It has the advantages of high power and low noise, and can be used for optical fiber communication, laser radar, etc.
[特徴]
高出力。
高いゲイン係数。
広い波長範囲。
[応用]
光ファイバ通信
光ファイバーセンシング
レーザーレーダー
[仕様]
Parameters
パラメーター |
Unit
単位 |
Typical value
典型値 |
Remarks
備考 |
Model
モデル
|
|
EYDFA-C-HP-BA-40-SM-M
|
|
Wavelength Range
波長範囲 |
nm |
1535~1565 |
Cバンド |
Input power
入力パワー |
dBm |
-6~+10 |
|
Saturated Output power
飽和出力パワー |
dBm |
40 |
@-3dBm input |
Output Adjustable Range
出力調整可能範囲 |
- |
10%~100% |
|
Noise index
雑音指数 |
dB |
<6.0 |
@-3dBm input |
Gain flatness
利得平坦性 |
dB |
1 |
@Different wavelengths are amplified separately |
Polarization dependent gain
偏光依存利得 |
dB |
<0.5 |
|
Polarization mode dispersion
偏光モード分散 |
ps |
0.5 |
|
Input/output isolation
入力/出力側分離度 |
dB |
>35 |
|
Pigtail fiber type
ピグテールファイバータイプ |
|
SMF-28e シングルモードファイバー |
L=1m |
Pigtail connector type
ピグテールコネクタタイプ |
|
FC/APC |
|
Work mode
作業モード |
|
ACC/APC |
*注1 |
Electrical and environmental parameters
電気および環境パラメータ
|
Desktop Type
デスクトップ型
|
Module Type
モジュールタイプ(現行品)
|
Control method
制御モード
|
Button
|
RS232 serial communication
|
Communication interface
通信インターフェース
|
DB9 Female
(Default not include)
|
DB9 Female
|
Power supply
電源
|
AC 100~240V
|
DC 12V, 13A
|
Size
サイズ
|
260(W)×320(D)×120(H)mm
|
139(W)×235(D)×70(H)mm
|
Operating temperature range
動作温度範囲
|
-5~+35°C
|
Operating humidity range
動作湿度範囲
|
0~70%
|
*注1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
ACCモード - 自動電流制御:EDFAポンピング動作電流はユーザーによって設定され、EDFAによって自動的にロックされ、一定のポンピング電流を実現します。 入力光パワーが変動すると、それに応じて出力パワーも変動します。これは、すべてのEDFAモデルに適しています。
APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.
APCモード - 自動電力制御:EDFAの信号光出力電力はユーザーが設定し、PDは出力電力を自動的に監視およびフィードバックします。EDFA制御および適応調整ポンプは出力信号の安定性を実現します。 入力光パワーが変動する場合、APCモードは出力パワーの変動を最小化し、パワータイプおよびラインタイプEDFAに適しています。