受動QスイッチV:YAG結晶 イットリウムアルミニウムガーネットの結晶 カスタマイズ可能
四面体の位置に3価のバナジウムV³+をドープしたイットリウムアルミニウムガーネット(YAG)の結晶は、パッシブQスイッチング用の比較的新しい材料です。 V:YAGは、1.0〜1.5 µm領域で動作するレーザーの効率的なQスイッチとして機能します。 1.0〜1.5 µmの吸収帯は、ガーネット格子の四面体位置でのV³ +イオンの³A2→³T2遷移に起因します。 四面体位置でのV³+の濃度は、成長およびアニーリング条件によって制御されます。 1.064ミクロンと1.3ミクロンの両方で動作するレーザーの効率的なQスイッチングは、Nd:YAG、Nd:YVO4、Nd:KGd(WO4)2 などのフラッシュランプとレーザーダイオードポンピング下でアクティブな媒体を使用して実現されています。
The crystals of Yttrium-Aluminum Garnet (YAG) doped with three-valence vanadium V³+ in tetrahedral position is relatively new material for passive Q-switching. V:YAG has working as efficient Q-switch for lasers operating in the 1.0~1.5 µm region. The absorption band between 1.0~1.5 µm is attributed to ³A2 →³T2 transition of V³+ ion in tetrahedral position of garnet lattice. Concentration of V³+ in tetrahedral position is controlled by growth and annealing conditions. The efficient Q-switching of lasers operating at both 1.064 and 1.3 micron has been obtained with a number of active mediums such as Nd:YAG, Nd:YVO4, Nd:KGd(WO4)2 under flash-lamp and laser diode pumping.
注意:
1. これはカスタマイズされた製品です。
2. 5500円は保証金であり、商品の最終価格ではありません。
3. 価格に影響を与える主な要素:数量、サイズ、処理インデックス。
4. 結晶加工図または結晶サイズ、膜、数量、加工指数をご提供ください。 (お問い合わせ)
5. クリスタルのカスタマイズ期間:3〜6週間。
6. 保証:1年
典型的な属性:
属性 |
V³+:YAG |
波長 (nm) |
1000~1500 |
初期透過率(%) |
15~95 |
初期吸収係数 (cm^-1) |
0.1~2.0 |
基底状態の吸収断面積(cm²) |
7.2 x 10-18@1.32 µm
3.0 x 10-18@1.06 µm |
光路長(mm) |
0.2~5 |
直径 (mm) |
5~10 |
Cr:YAG の仕様:
パラメータ |
値 |
オリエンテーション |
The rod axis is along [111] within5° |
口径 |
2x2 ~ 10x10 mm |
長さ |
0.1 ~ 12 mm |
初期透過率 |
5% ~ 99% |
角度公差 |
Δθ< ± 0.5°; Δφ< ±0.5° |
平坦度 |
λ /8 @ 633 nm |
平行度 |
20 arc sec |
垂直度 |
5 arc minutes |
表面仕上げ |
20/10 scratch/dig to MIL-O-13830A |
波面歪み |
less than λ/8 @ 633 nm |
コーティング |
AR/HR/PR coating upon customer’s request. |