Er添加ファイバ増幅器 In-Line Amplifier Cバンド EDFA-C-LA-13-SM-M 13dBm 20mW モジュール

244,254円  172,293円
割引: 29%OFF

カートに入れる:


Er添加ファイバ増幅器 In-Line Amplifier Cバンド  EDFA-C-LA-13-SM-M 13dBm 20mW  モジュール

In-Line amplifier (LA) is an optical power amplifier product dedicated to line relays in fiber laser or fiber communication systems. It combines the advantages of PA amplifiers and BA amplifiers. It has the advantages of high gain, high transmission power, and relatively low noise. Between fiber segments to increase the length of the relay or the corresponding single-point to multi-point part of the optical access network to compensate for the branch loss.
ラインアンプ(LA)は、ファイバーレーザーまたはファイバー通信システムのラインリレー専用の光パワーアンプ製品です。PAアンプとBAアンプの利点を組み合わせたもので、高ゲイン、高送信電力、比較的低ノイズという利点があります。 分岐損失を補償するために、光アクセスネットワークのリレーまたは対応するシングルポイントからマルチポイントの部分の長さを増やすためのファイバセグメント間。

[特徴]
広い波長範囲
高ゲイン係数
高出力

[応用]
光ファイバ通信
光ファイバセンシング
ファイバーレーザー

[仕様]

Parameters
パラメーター

Unit
単位

Typical value
典型値

Remarks
備考

Model
モデル

 

EDFA-C-LA-13-SM-M

 

Wavelength Range
波長範囲

nm

1530~1565nm

Cバンド

Input power
入力パワー

dBm

-25 ~ -3

 

Saturated Output power
飽和出力パワー

dBm

≥13

@-10dBm input

Small Signal Gain Factor
小信号利得係数

dB

≥35

@-25dBm Input

Noise Index
雑音指数

dB

5.5

@ -10dBm input

Polarization Dependent Gain
偏光依存利得

dB

0.5

 

Polarization Mode Dispersion
偏光モード分散

ps

0.5

 

Input/Output Isolation
入力/出力アイソレーション

dB

>35

 

Pigtail Connector Type
ピグテールコネクタタイプ

--

FC/APC

 

Pigtail Fiber Type
ピグテールファイバータイプ

--

SMF-28e シングルモードファイバー

L=1m

Work mode
作業モード

--

ACC / APC

*注1

 

*注1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
ACCモード - 自動電流制御:EDFAポンピング動作電流はユーザーによって設定され、EDFAによって自動的にロックされ、一定のポンピング電流を実現します。 入力光パワーが変動すると、それに応じて出力パワーも変動します。これは、すべてのEDFAモデルに適しています。

APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.
APCモード - 自動電力制御:EDFAの信号光出力電力はユーザーが設定し、PDは出力電力を自動的に監視およびフィードバックします。EDFA制御および適応調整ポンプは出力信号の安定性を実現します。 入力光パワーが変動する場合、APCモードは出力パワーの変動を最小化し、パワータイプおよびラインタイプEDFAに適しています。

 

Electrical and environmental parameters
電気および環境パラメータ

Desktop Type
デスクトップ型

Module Type
モジュールタイプ(現行品)

Control Method
制御モード

Button

RS232 Serial communication

Communication Interface
通信インターフェース

DB9 Female(Default not include)

DB9 Female

Power Supply
電源

AC 100~240V

DC 5V, 3A

Size
サイズ

260(W)×280(D)×120(H)mm

125(W)×150(D)×20(H)mm

Operating Temperature Range
動作温度範囲

-5~+35°C

Operating Humidity Range
動作湿度範囲

0~70%

 

 

EDFA ファイバーアンプ

EDFA in-line amplifier






wabusiness template