多波長利得平坦化 EDFA Er添加ファイバ増幅器 Pre Amplifier EDFA-C-PA-GF-25-SM-B 25dB LCDタイプ

ベース価格: 316,785円  268,380円
割引: 15%OFF

選択して下さい:



カートに入れる:


多波長利得平坦化 EDFA Er添加ファイバ増幅器 Pre Amplifier EDFA-C-PA-GF-25-SM-B 25dB  LCDタイプ

ゲインフラットエルビウムドープファイバ増幅器は、光ファイバ通信システム用に特別に使用される一連のファイバ増幅器製品であり、Cバンドの複数の波長信号を同時に増幅し、波長間で同じゲインをゲインで維持できます。平坦度は1.5dB以下。
広いスペクトル、複数の波長、フラットゲイン、高ゲイン、低ノイズという利点があります。

多波長利得平坦度エルビウムドープファイバ増幅器(GF EDFA)は、光ファイバ通信システム専用のファイバ増幅器製品ファミリです。 それは多波長および利得平坦化、および高利得および低雑音の利点があります、PCソフトウェアの制御をサポートし、コンパクトで統合が簡単ですが、デスクトップまたはラックタイプのパッケージングを提供する顧客のニーズにも対応します。

Multi-wavelength Gain Flatness Erbium doped fiber amplifier  (GF EDFA )  is a family of fiber amplifier products dedicated to optical fiber communication systems,it has multi wavelength and gain flattening, and high gain and low noise advantages, support PC software control, compact, easy to integrate, but also according to customer needs to provide desktop or rack type packaging.


EDFAは2種類あります(現在の製品はプリアンプタイプです)。
プリアンプ増幅器:PAと呼ばれ、小光信号増幅の-40〜-25 dBmの範囲で使用されます、標準利得は35 dBです。
ブースタ増幅器: BAと呼ばれる,光信号は- 6 ~ + 3 dBmの範囲内での電力を向上させるため、最大出力電力は27 dBmである。

There are two types EDFA.(Current product is Pre-Amplifier type.)
Pre - Amplifier: referred to as PA, that is preamplifier, used in the -40 ~ -25 dBm range of small light signal amplification, typical gain of 35dB;
Booster - Amplifier: referred to as BA, is used to enhance the power of the optical signal in the range of - 6 ~ + 3 dBm, with a maximum output power of 27 dBm;
 

[特性]
広い動作波長範囲
ハイゲインとフラットゲイン
温度適応性が良い

[応用]
光ファイバ通信
光ファイバセンサ
ファイバーレーザー

[仕様]

Parameters
パラメーター

Unit
単位

Typical value
典型値

Remarks
備考

Model
モデル

--

EDFA-C-PA-GF-25-SM-B
(Current Product)

EDFA-BA-GF

 

Wavelength Range
波長範囲

nm

1530~1565

C-band

Input power
入力パワー

dBm

-45~-25

-12~+3

 

Output power
出力パワー

dBm

≥14dBm@-25dBm input

17/20/23/25/26
(choose)

 

Gain coefficient
利得係数

dB

≤25

 

Noise index
雑音指数

dB

5

 

Gain flatness
利得平坦性

dB

1.5(Typical) 

 

Polarization dependent gain
偏光依存利得

dB

<0.3

 

Polarization mode dispersion
偏光モード分散

ps

0.5

 

Input/output isolation
入力/出力側分離度

dB

>35

 

Pigtail fiber type
ピグテールファイバータイプ

--

SMF-28 Single Mode fiber

Φ=3mm loose tube, L=1m

Pigtail connector type
ピグテールコネクタタイプ

--

FC/APC

 

Work mode
作業モード

--

ACC/APC

ACC/APC

*注1

 

*注1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
ACCモード - 自動電流制御:EDFAポンピング動作電流はユーザーによって設定され、EDFAによって自動的にロックされ、一定のポンピング電流を実現します。 入力光パワーが変動すると、それに応じて出力パワーも変動します。これは、すべてのEDFAモデルに適しています。
APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.
APCモード - 自動電力制御:EDFAの信号光出力電力はユーザーが設定し、PDは出力電力を自動的に監視およびフィードバックします。EDFA制御および適応調整ポンプは出力信号の安定性を実現します。 入力光パワーが変動する場合、APCモードは出力パワーの変動を最小化し、パワータイプおよびラインタイプEDFAに適しています。

 

Electrical and environmental parameters
電気および環境パラメータ

Desktop Type
デスクトップ型(現行品)

Module Type
モジュールタイプ

Control method
制御モード

Button

RS232 Serial communication

Communication interface
通信インターフェース

DB9 Female
(Default not include)

DB9 Female

Power supply
電源

AC 100~240V

DC 5V, 3A

Size
サイズ

260(W)×280(D)×120(H)mm

125(W)×150(D)×20(H)mm

Operating temperature range
動作温度範囲

-5~+35°C

Operating humidity range
動作湿度範囲

0~70%

 

 

 

エルビウム添加ファイバ増幅器 EDFA

エルビウム添加ファイバ増幅器 EDFA

エルビウム添加ファイバ増幅器 EDFA

エルビウム添加ファイバ増幅器 EDFA

エルビウム添加ファイバ増幅器 EDFA






wabusiness template